Skip to main content
Module 5 · Pathfinding Around Obstacles

Lesson 5-7 · Obstacle Detection with the Rangefinder — Knowledge Checks

Name Date
  1. How does an ultrasonic rangefinder measure distance?

    1. A.It uses a camera to estimate size
    2. B.It sends a sound pulse and times how long the echo takes to return
    3. C.It counts wheel rotations
    4. D.It reads a GPS signal

    Answer Why?

  2. Why use a threshold instead of checking for an exact distance?

    1. A.Exact distances are illegal
    2. B.Sensor readings vary slightly (noise), so a cutoff is more reliable than an exact match
    3. C.To make the robot slower
    4. D.Thresholds use less memory

    Answer Why?

  3. The robot is at (2,1), has just turned to face the next step on its path, (1,1), and the rangefinder reads 8 cm. Which intersection is blocked?

    1. A.(2,1) — where the robot is
    2. B.(1,1) — the next step on the path, which the robot is now facing
    3. C.(3,1)
    4. D.It depends on the heading number

    Answer Why?

  4. When the robot detects a new obstacle, what does it do to reroute?

    1. A.Stops permanently
    2. B.Calls add_blocked(next_pos), then compute_bfs_path(position, destination) from where it is
    3. C.Reverses back to the start
    4. D.Ignores it and drives through

    Answer Why?

  5. Why does the robot not need a separate 'rebuild the graph' step after add_blocked()?

    1. A.Because compute_bfs_path builds the graph from BLOCKED every time it is called
    2. B.Because the graph is never rebuilt — obstacles are checked while driving
    3. C.Because add_blocked rebuilds the graph itself
    4. D.It does need one — the code above is missing it

    Answer Why?

  6. Why test with a simulated rangefinder before using the real one?

    1. A.The real sensor never works
    2. B.To verify the detect-and-reroute logic in software first, separating code bugs from hardware bugs
    3. C.Simulation is required by Python
    4. D.To avoid writing the loop

    Answer Why?