# robot.py after Lesson 4-1 (class track): every skeleton
# through Lesson 4-1 pasted in, nothing written yet.

from XRPLib.reflectance import Reflectance
from XRPLib.differential_drive import DifferentialDrive
from XRPLib.board import Board
import time
import random

reflectance = Reflectance.get_default_reflectance()
drivetrain = DifferentialDrive.get_default_differential_drive()
board = Board.get_default_board()


# ===== LINE SENSOR (Lesson 2-7, class version) =====
# One LineSensor object owns the reflectance sensor and its
# threshold, and answers questions about the line: how far off
# it we are (get_error) and whether we are on a cross or on a
# line at all. Nothing in here drives. Everything that drives,
# from the next lesson on, asks this object.

class LineSensor:
    def __init__(self):
        self.reflectance = Reflectance.get_default_reflectance()
        self.threshold = 0.5

    def get_left(self):
        pass

    def get_right(self):
        pass

    def get_error(self):
        pass

    def is_at_cross(self):
        pass

    def is_either_on_line(self):
        pass

sensor = LineSensor()

def test_sensors():
    # prints both readings 50 times, a tenth of a second apart
    for i in range(50):
        print("Left:", sensor.get_left(), "  Right:", sensor.get_right())
        time.sleep(0.1)

def test_drive_to_line():
    # read the left sensor into a variable
    # while that reading says "white":
    #     drive forward
    #     read the sensor again
    # stop the motors
    # print the reading that ended the loop
    pass

def test_bounce():
    # loop forever:
    #     if the left sensor sees the line:
    #         stop, print a message, turn around
    #     else:
    #         drive forward
    pass

def test_random_bounce():
    # a copy of test_bounce(), with the if branch becoming:
    #     stop
    #     pick a random whole number of degrees, 90 to 270
    #     print it, so you can see each choice
    #     turn by that many degrees
    pass


# ===== LINE TRACKING (class version) =====
# One LineTrack object drives the robot along the line. It HAS
# A LineSensor (built in __init__, so you never make one
# separately) and asks it the questions; it HAS the drivetrain
# and gives it the orders. Same three methods as the function
# version, same names, with tracker. in front.

class LineTrack:
    def __init__(self):
        self.sensor = LineSensor()           # has-a LineSensor
        self.drivetrain = DifferentialDrive.get_default_differential_drive()
        self.base_effort = 0.4
        self.kp = 0.5
        self.turn_effort = 0.25

    def track_to_intersection(self):
        # your function, with self. in front of the sensor,
        # the drivetrain and the settings
        pass

    def turn_clockwise(self):
        pass

    def turn_counterclockwise(self):
        pass

tracker = LineTrack()

def test_follow():
    # loop forever:
    #     error = sensor.get_error()
    #     correction = error times tracker.kp
    #     steer: arcade() with tracker.base_effort and the correction
    #     time.sleep(0.01), so the loop doesn't flood the
    # processor
    pass

def test_sweep():
    # no motors: sweep the robot across the line BY HAND while
    # this runs, and watch error and correction change sign at
    # the edge
    for i in range(500):
        error = sensor.get_error()
        correction = error * tracker.kp
        if i % 50 == 0:
            print(f"i={i}  error={error:.2f}  correction={correction:.2f}")
        time.sleep(0.02)

def test_cross_moving():
    # robot 20-30 cm from a straight line, square on: drive
    # until the cross check fires
    while not sensor.is_at_cross():
        drivetrain.set_effort(0.3, 0.3)
    drivetrain.stop()
    print("Cross!")

def test_track():
    # robot on the circle, pointed along it: follow to the
    # cross and stop
    tracker.track_to_intersection()
    print("Done!")

def test_reverse():
    # follow to the cross, turn around on it, follow back
    tracker.track_to_intersection()
    drivetrain.turn(180)
    tracker.track_to_intersection()
    print("Done!")

def test_turn():
    # follow to the cross, then turn until a sensor finds a
    # line: on the circle, that is all the way around
    tracker.track_to_intersection()
    tracker.turn_clockwise()

def test_course():
    # follow, turn around, follow the circle back to the
    # cross: the whole lesson in three calls
    tracker.track_to_intersection()
    tracker.turn_clockwise()
    tracker.track_to_intersection()
    print("Done!")

# --- Lesson 2-10: final project ---
# The module project: lap the circle, reversing at the cross,
# four times, then stop. Nothing new is defined for it. It is
# a list of calls to the three driving functions above, which
# is the point: the sections did the work, the project
# assembles them.

def test_reversal():
    # follow to the cross, turn around (one clockwise turn
    # does it here), then follow back to the cross
    pass

def test_final_project():
    # the mission: follow to the cross, reverse,
    # four times in all; then stop and print "Done!"
    # write your plan here as comments first, then the code
    pass


# ===== GRID DRIVING =====
# Drives the taped grid one intersection at a time, using only
# the LINE TRACKING functions: a grid intersection is the
# cross from Module 2. To ARRIVE at an intersection is
# track_to_intersection(), which stops with the robot's
# center on it; a turn happens parked there. Nothing here
# touches a sensor.

def test_first_intersection():
    # from a line, arrive at the next intersection and say so
    pass

def test_arrive_and_turn():
    # arrive at the intersection, then turn right onto the
    # crossing line
    pass

# --- Lesson 3-2: a run of intersections ---
# drive_intersections(count) is track_to_intersection() in a
# loop.
# It ends parked on the count-th intersection, so Lessons 3-3
# and 3-4 build every path out of it and the two turns.

def drive_intersections(count):
    """Arrive at count intersections in a row, printing
    which one it is each time. Ends parked on the last one
    with the sensors past it, ready to turn or to go on."""
    pass

def test_two_by_hand():
    # tracker.track_to_intersection() written out twice, no loop: the
    # robot should end parked on the SECOND intersection
    pass

def test_drive_run():
    # drive_intersections(3), then print that it is done
    pass

# --- Lesson 3-3: turning on the grid ---
# No new function: a path is drive_intersections(), a turn,
# drive_intersections() again. The turn works because the
# helper leaves the wheels parked on the intersection.

def test_l_shape():
    # drive 2 intersections, turn right, drive 2 more, then
    # print that the L is complete
    pass

def test_my_path():
    # the path you planned on paper, one leg per line
    pass

# --- Lesson 3-4: final project, the square ---
# The module project: four sides of SIDE intersections with a
# right turn at every corner, back to the start. Built from
# drive_intersections() and one turn; nothing new is defined.
SIDE = 2                 # intersections per side

def test_one_side():
    # one side of the square: drive SIDE intersections, then
    # turn right
    pass

def test_square():
    # the project. A for loop that runs one side per pass,
    # printing which side it is on; then the finish message
    pass


# ===== MANHATTAN PLANNER =====
# Plans a route across the grid: given where the robot is and
# where it should go, returns the list of (x, y) tuples to
# drive to. Nothing in here touches a sensor or a motor.

def compute_manhattan_path(start, destination):
    """STUB: a pretend path that jumps straight to the
    destination. Lesson 4-2 replaces it."""
    print("computing path from:", start, "to:", destination)
    return [destination]


# ===== NAVIGATOR =====
# Drives a planned path, one intersection at a time, and hands
# back where the robot ended up and which way it faces.

def drive_path(path, current_position, current_heading):
    """STUB: pretend to drive -- just jump to each
    intersection in path. Lesson 4-4 replaces it."""
    for next_pos in path:
        print("moving: from", current_position, "to:", next_pos)
        current_position = next_pos
    return current_position, current_heading

# --- The main program: the delivery run ---
DELIVERY_STOPS = [(2, 3), (1, 0), (3, 1), (2, 2), (0, 0)]

def test_delivery():
    # 1. robot_position starts at (0, 0); robot_heading
    #    starts at 0, North
    # 2. for each delivery_destination in DELIVERY_STOPS:
    #      plan the path from robot_position, and print it
    #      drive it, and assign the pose it hands back
    #      print "new position:", robot_position,
    #            "heading:", robot_heading
    pass

# ===== RUN =====
board.wait_for_button()
# call ONE test function here
